Search:
Audix MB5055-HC 50" Carbon Fiber Boom with M1255BHC Hypercardioid Mic
by Audix

List Price:
$659.00
FPL Price:
$629.00
Savings:
$30.00 (4.55%)

Sorry! This item is currently unavailable.

Sorry! This item is currently unavailable.
Share On:
    

Audix MB5055HC Carbon Fiber Boom with M1255B high output and Hypercardioid capsule
The MicroBoom™ is a 50" carbon fiber rod compatible with any of The Micros. Lightweight, able to attach to any microphone stand, the MicroBoom(tm), is a problem solver for many hard-to-reach miking applications including choir, live theater and orchestra.

The MicroBoom™ can be used with any of the microphones in The Micros™ series providing a broad selection of pick-up patterns, output levels and frequency responses. A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom. The stand adapter offers total control over the angle, rotation and position of the carbon fiber rod by way of a flexible metal gooseneck. The MicroBoom™ provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability.

The M1255B is a miniaturized condenser microphone with a fully integrated preamp and detachable cable. This mic is designed with a very high sensitivity for distance miking. Applications include ceiling or table mount for conferences, overhead choir miking, location recording as well as audience or room miking.

The M1255B has immunity from RF interference caused by cell phones and GSM devices.

MB5055HC - MICROBOOM50 with M1255BHC hypercardioid mic

Audix MB5055HC Carbon Fiber Boom with M1255B high output and Hypercardioid capsule
  • Lightweight, rigid
  • Portable, easy to position
  • Clean, elegant appearance
  • Exceptional sound quality
  • No external power adapter needed
  • Attaches to any mic stand
  • Can be used horizontally or vertically
  • Small, lightweight, low profile
  • Miniaturized integrated preamp circuitry
  • No external power adapter needed
  • 12 mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Hypercardioid pattern

Audix MB5055HC Carbon Fiber Boom with M1255B high output and Hypercardioid capsule
  • Material Rod: Carbon Fiber
  • Gooseneck: Steel
  • Connectors: Brass
  • Length (Microboom): 50" / 1270 mm
  • Diameter (Microboom): .20" / 7.4 mm
  • Connectors Bottom: Mini-xlr male
  • Connectors Top: Mini-xlr female
  • Weight (Microboom): 2.5 ounces / 78 grams (without mic or clip)
  • Finish (Microboom): Non-reflective black
  • Transducer Type: Condenser
  • Frequency Response: 50 Hz - 19 kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 150 ohms
  • Sensitivity: 32 mV / Pa (HC) @ 1k
  • Signal/Noise Ratio (A-weighted): 73 dB
  • Equivalent Noise Level (A-weighted): 21 dB
  • Maximum SPL @ .5% THD: =130 dB
  • Dynamic Range: 109 dB
  • Power Requirements: 18 -- 52 V
  • Connector: 3 pin mini-XLRm
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  • Housing / Finish (Mic): Machined brass/Powder coat
  • Weight (Mic): 0.7 oz / 20 grams
  • Length (Mic): 2.1 inches / 54 mm

Audix MB5055HC Carbon Fiber Boom with M1255B high output and Hypercardioid capsule
(1) MICROBOOM50 Carbon Fiber Rod
(1) MCBOOM Mic stand adapter with thumbscrew and wing nut adjustments
(1) M1255BHC Mini Hypercardioid Condenser Microphone